How to Use Opel Tech2 PL USB 18 Interface for Diagnostic Purposes
If you own an Opel car or a VAG (Skoda, Audi, Seat, VW) vehicle, you may want to perform some diagnostic tests on your own. For that, you will need a professional diagnostic interface that can connect your car to your PC via USB and OBD2 ports. One such device is the Opel Tech2 PL USB 18 interface, which allows full diagnosis of all modules and displays fault codes with descriptions.
In this article, we will show you how to use the Opel Tech2 PL USB 18 interface for diagnostic purposes. We will cover the following topics:
What is the Opel Tech2 PL USB 18 interface and what are its features
How to install the Opel Tech2 PL USB 18 interface on your PC
How to connect the Opel Tech2 PL USB 18 interface to your car
How to perform diagnostic tests with the Opel Tech2 PL USB 18 interface
What is the Opel Tech2 PL USB 18 Interface and What are its Features
The Opel Tech2 PL USB 18 interface is a professional diagnostic device that can communicate with your car's electronic control units (ECUs) via OBD2 port. It supports most Opel models from 1997 to 2004 and some VAG models from 1996 to 2004. It can read and clear fault codes, display live data, perform actuator tests, program keys, reset service intervals, and more.
The Opel Tech2 PL USB 18 interface has the following features:
It is compatible with Windows XP, Vista, 7, 8, and 10 operating systems.
It has a USB port for connecting to your PC and an OBD2 port for connecting to your car.
It has a LED indicator that shows the communication status.
It has a switch that allows you to select between Opel and VAG modes.
It comes with a CD-ROM that contains the software and drivers for installation.
How to Install the Opel Tech2 PL USB 18 Interface on your PC
To install the Opel Tech2 PL USB 18 interface on your PC, you will need to follow these steps:
Insert the CD-ROM that came with the device into your PC's CD drive.
Run the setup.exe file and follow the instructions on the screen.
Select the language and destination folder for installation.
When prompted, connect the device to your PC via USB cable.
Wait for the drivers to be installed automatically.
When the installation is complete, restart your PC.
How to Connect the Opel Tech2 PL USB 18 Interface to your Car
To connect the Opel Tech2 PL USB 18 interface to your car, you will need to follow these steps:
Make sure your car's ignition is switched off.
Locate the OBD2 port under your dashboard or near the steering wheel.
Connect one end of the OBD2 cable to the device and the other end to the OBD2 port on your car.
Switch on your car's ignition but do not start the engine.
On the device, slide the switch to either Opel or VAG mode depending on your car model.
The LED indicator on the device should light up green if the connection is successful.
How to Perform Diagnostic Tests with the Opel Tech2 PL USB 18 Interface
To perform diagnostic tests with the Opel Tech2 PL USB 18 interface, you will need to follow these steps:
Launch the software on your PC by double-clicking on the icon on your desktop or in your start menu.
Select your car model and year from the drop-down menu.
Select the module or system that you want to aa16f39245